We are here with you hands in hands to facilitate your learning & don't appreciate the idea of copying or replicating solutions. Read More>>
Study Groups By Subject code Wise (Click Below on your university link & Join Your Subject Group)
Looking For Something at vustudents.ning.com?Search Here
I am using DVG 6004 with Linksys PAP2T adapter.
I have two incoming PTCL land lines. Connected both with DVG 6004.
DVG connected to my local area network (LAN) through WAN port of DVG-6004.
A simple switch / router connects it to LinkSys PAP2T adapter.
I have two telephone sets connected to ports of Linksys.
I am able to dial out using from both telephone sets from any of the landlines ( connected to DVG - 6004) , but unable to receive the incoming call. My DVG-6004 shows PlayBusyTone in Current Status of Call.
I am not very clear about SIP, but could configure it to dial out from any location in my network through phone.
I am not using any INTERNET VoIP. I want it for local network , with few rooms.
If you are using similar system, please guide.
Can anyone one share backup.profile and backup.template file of DVG-6004
Share This With Friends......
For Multiple Talk at the same time ..... U can wait more for professional's comments of narrated question over here.
Hope to receive professional reply.
Some how we are more fun loving and generally avoid to help other.
Hope for the best.....
we waste time in gup shup, but avoid to share knowledge and experience.
Last night, i was stuck in a remote mountainous area of Pakistan, there was land slide and road blocked due to a huge rock , it was 10 PM and no population and traffic on road.
I decided to clear to rock - say stone of 8 ft by 8 ft size. I used hydraulic jack and was able to clear the road after 3 hours continuous effort.
Allah swt help those who help themselves.
Waiting for some one to reply on my problem with DVG-6004