CS609 System Programming Assignment No 01 Solution & Discussion Spring 2019 Due Date: 13-05-2019

CS609 System Programming Assignment No 01 Solution & Discussion Spring 2019 Due Date: 13-05-2019

  Problem Statement:You are required to writ C program using interrupt 65H to print your own Student ID, Name or your Study Program depending upon the number input i.e 1,2,3 respectively. When the user enters 1 it will print your own Student ID, if 2 then print your own Name and finally, if the user enters 3, it will print your Study Program.Instructions:Declare 3 character strings st1,st2,st3 having Student ID, Name and Study Program You should save interrupt 65H vector in a pointer to vector variable name oldint65 through getvect instruction. Call any new function i.e newint65( ) through setvect instruction.Through printf instruction, show message “What you want to print: Press 1,2,3= ” i.eprintf(“What you want to print: Press 1,2,3= ”);Then use scanf to take input input in an integer variable i.e scanf(“%d”, &i)In this program, you will implement interrupt 65H which is currently not used by operating system.Place service number in AH register. Interrupt 65H will check its value and will perform relevant function.Interrupt 65H function must check for Service Number using Switch Statement. In Case of Service Number 1, it should print Student ID i.e BC123456 and in case of Service Number is 2, it should print your own full name i.e Ali Ahmad. Similarly your study program i.e BS/MCS etc should be printed in case of number 3.Use keep() function to make this program TSR.
Note: Your assignment solution will be in this Word file (.doc or .docx) containing code of C only as given in sample solution:
Best of Luck!

Sample Solution://Header Files#include<stdio.H>#include<BIOS.H>#include<DOS.H>#include<conio.H>void interrupt (*oldint 65)(); //To store current interruptchar str1[80]={“BC123456$”}  // Write your own particularschar str2[80]={“Ali Ahmad$”}char str3[80]={“Degree Program:  BS$”}int i;void interrupt newint65(void);  //NewInt prototypevoid main(){// Keep vector of current INT//setting to newint65 clrscr();printf(“What you want to print: Press 1,2,3=>”);scanf(“%d”,&i);_AH=i;getch();}void interrupt newint65(){ switch(i){  case 1:           //Service Number  // Register for output.  break; } case 2:      break; } case 3:      break; } default:  {  }}  

Views: 6621

Replies to This Discussion

koi bhe slution tkh nh hai.

bhaj do bhai boht sari try kr li koi ni mil rahi he 

not yet upload solution file..........

Where is the solution file 

in case any issue please comment.

sorry for mistake in previous post.

void interrupt (*oldint65)();void interrupt newint65(void);
char str1[80] = {"Your VU ID"};char str2[80] = {"Your Name"};char str3[80] = {"Your Degree Program"};
int i;
void main(){
oldint65 = getvect(0x65);
setvect(0x65, newint65);

printf("What you want to print: Press 1,2,3=>");


_AH=i; geninterrupt(0x65); getch();
void interrupt newint65(){ switch(i) { case 1: printf("%s",str1); break; case 2: printf("%s",str2); break; case 3: printf("%s",str3); break; default: printf("Enter Valid Number"); break;

code compile but dont run.and you dont have keep() function.please help 

yar ye konsay software per chalay ga code?


you can add keep after getch();

Hi,Just a one question Did you run this program yourself? because it does not run  Neither .C Nor .CPP Format.

Code compile ho jata ha pr jb keep ka function add krta hon to run nahi hota compile ho jata ha?? aisa ku hota ha? kis line k bd add hoga keep function?


© 2021   Created by + M.Tariq Malik.   Powered by

Promote Us  |  Report an Issue  |  Privacy Policy  |  Terms of Service