We are here with you hands in hands to facilitate your learning & don't appreciate the idea of copying or replicating solutions. Read More>>
i want to discuss gdb
Share This With Friends......
Please Discuss here about this GDB.Thanks
Our main purpose here discussion not just Solution
We are here with you hands in hands to facilitate your learning and do not appreciate the idea of copying or replicating solutions. Read More>>
For Important Helping Material related to this subject (Solved MCQs, Short Notes, Solved past Papers, E-Books, FAQ,Short Questions Answers & more). You must view all the featured Discussion in this subject group.
For how you can view all the Featured discussions click on the Back to Subject Name Discussions link below the title of this Discussion & then under featured Discussion corner click on the view all link.
Or visit this link
Please Click on the below link to see…
An Encoder functional device performs an operation which is the opposite of the
Decoder function. The Encoder accepts an active level at one of its inputs and at its output
Generates a BCD or Binary output representing the selected input. There are various types of
Encoders that are used in Combinational Logic Circuits.
The simplest of the Encoders are the 2n-to-n Encoders.
Priority Encoders remove the problem highlighted earlier with simple Binary Encoders.
Priority Encoders have necessary logic to activate the outputs corresponding to the highest
Priority input when multiple inputs are asserted simultaneously.
Boolean expressions for the three outputs O2, O1 and O0 of an 8-to-3 Priority Encoder
Are can be written in terms of variables.
Cascading Priority Encoders
The 74XX148 Priority Encoder has active-low inputs and active-low outputs. The
Encoder also has an active-low enable input E1 which enables or disables the outputs. The
Group Select GS active-low output is asserted when any one of the inputs is asserted. The
Enable output EO signal is used to cascade multiple Encoders to form larger Encoders. The
EO output is connected to the EI input of the Encoder which handles lower priority inputs.
tell me which encoding will use by institute by given scenario in gdb topic.
Mawara batool thanks for sharing
An LED or Light Emitting Diode, is a solid state optical PN-junction diode which emits light energy in the form of “photons” when it is forward biased by a voltage allowing current to flow across its junction, and in Electronics we call this process electroluminescence.
In most practical applications, 7-segment displays are driven by a suitable decoder/driver IC such as the CMos from a 4-bit BCD input. Today, LED based 7-segment displays have been largely replaced by liquid crystal displays (LCDs) which consume less current.
not a answer just to discus
from where you get this?
just searching sites on google,trying to find something relevant from where atleast i can understand what to do!
which encoding mechanism will be used by the institute for automating this task?
You have to give valid arguments by keeping in view the following points:
first we have to know what is process behind converting photosensor to 7_segment?
i think then we will be able to guess this process mach to which encoding technique/
Priority Encoders can not be used becaos it requir more time for process
ok priority encoder use nai hona .mean ho ga inhe encoders main sey binary ya cascading encoders?
kisi site se b help nai mil rai question kuch ajeeb sa hai.
agr kisi k pass is se related koi information hai to share krain becaz last 8 hours left.
yes question is cconfusing.