Assignment No. 02
Total Marks: 20
Due Date: 28/05/2014
Please read the following instructions carefully before submitting assignment:
To understand and familiarize with ADA Language.
For any query about the assignment, contact at email@example.com or through MDB.
To find the area of a sphere we use following formula
Write a complete program in Ada to solve this formula. Note that each mathematical operator (such as multiplication and division) should be solved in a separate subprogram.
In the main program you will use 7 as the value of r.
Your program will display the final result and your VU student id.
Hint : You need to solve equation (4 / 3 ) *( 3.14 * r * r *r)
Question Marks 10
You will go to page http://www.compileonline.com/compile_ada_online.php
Paste you code written in the Question 1 in right hand pan and press Compile & Execute button, then you will take screen shot of the output and paste in your solution file. As shown below
BEST OF LUCK
Muhammad Junaid Arshad, What is the procedures and how to use them? Please explain and give us code with thanks....time is very short
ap ne function kaisae banaye hain ?
procedure se ya phir package se ??
with Ada.Text_IO;with Ada.Integer_Text_IO; with Ada.Float_Text_IO;
use Ada.Text_IO;use Ada.Integer_Text_IO;use Ada.Float_Text_IO;
procedure find is
var1 : Float := 4.0;
var2 : Float := 3.0;
var3 : Float := 7.0;
var4 : Float := 3.14;
var5 : Float;
var6 : Float;
var7 : Float;
function number_division(var1, var2 : Float) return FLOAT;
function number_division(var1, var2 : Float) return FLOAT is
var5:= var1/ var2;
function number_multiplication (var3, var4, var5 : FLOAT) return FLOAT;
function number_multiplication (var3, var4, var5 : FLOAT) return FLOAT is
var6 := var3 * var3 * var3;
var6 := var6 * var4 * var5;
var5 := number_division(var1, var2);
var6 := number_multiplication (var3, var4, var5);
put("The Result is: ");
var7 := var5 * var6;
NOTE: i might have mixed the logic somewhere because the answer is not correct, please correct the logic
anyway the functions will be used just like i have wrote in my code...
:( mera ye error aa raha hai
Error - At least one procedure is required in main file
do u know keh kia problem ahi ?
ahhhh finally got mine :) Allhamdulillah :)
i think we have to pass value "7" in main.
Ap ne r ki value initialize ki hui hai, see this: In the main program you will use 7 as the value of r.
your error means that you must write code inside the 'procedure' it is like 'main' in C...
@ this is just an idea how to use the functions...