Latest Activity In Study Groups

Join Your Study Groups

VU Past Papers, MCQs and More

We non-commercial site working hard since 2009 to facilitate learning Read More. We can't keep up without your support. Donate.

CS601 Current Final Papers at One Place From March 01 to March 12, 2014

Views: 1215

Replies to This Discussion

Today's CS601 Paper
MCQs were mostly from past papers.
(2 Marks Questions)
1) Range of radio communications bands
2) Name of at least four itu-t  protocols
3) Why Addressing bits are added in Asynchronous ARQ and what is the disadvantage of it 
(3 Marks Questions)
1) State disadvantage of step index fiber over graded index.fiber
2) one question about HDLC
(5 Marks Questions)
1) Types of Noise
2) Mechanism of Sliding window with example of n = 8
3) Mechanism of HLDC and name and functions of three frames
4) Two companies A and B want to communicate through radio waves. Discuss about the modes of communication and write about at least two modes 
Rest I don't remember now, but 1 question of two marks is also about HDLC

 Comment by sehar (mcs) 1 hour agoDelete Comment

to day my paper
If db is amplified then attenuation is ------------------
Ø Positive (Page 142)
Ø Negative
Ø Zero
Ø None of the above
The _______________ layer changes bits into electromagnetic signals.
► physical 
► transport
► none of given
Data link protocols can be divided into ______________ sub-groups.
► two (Page 202)
► three
► four
► five
Check sum method is used for _______________ layers.
► Physical
► Application
► Transport
► Data link
Multiplexing is the set of techniques that allows simultaneous TX of multiple signals across ___________
data link
► Single (Page 147)
► Multi
► Single and Multi
► none of the given
Primary device uses ____________ to receive transmission from the secondary devices.
► POLL (Page 191)
The inversion of the level at 1 bit is called as __________
► NRZ-I (Page 73)
► RZ

How much bandwidth for modem is required in case of FSK? [2] Answer: BW required for FSK is equal to the Baud rate of the signal plus the frequency shift. Because of the limitations of voice-grade telephone lines, these modems are restricted to a bandwidth of about 3 kHz 
Question#2 What is R G rating of coaxial cable? Answer:- (Page 126) Different coaxial cable designs are categorized by their Radio government ( RG ) ratings Each cable defined by RG rating is adapted for a specialized function: RG-8
• Used in Thick Ethernet
• Used in Thick Ethernet
• Used in Thick Ethernet
• Used in Thin Ethernet
There are many types of redundancy check techniques but we want to apply a most common and less expensive error detection technique. You are required to describe the suitable technique meeting the given requirements. Also apply your suggested error detection technique on the message “vu” (ACHII code is given bellow).
01110110 v
01110101 u
A flow control method has its specific mechanism to keep track of transmitted and received frames. What is the main factor on which the identification scheme of sliding window relies to keep track of transmitted and received frames? Explain this tracking scheme with an example of n = 8

Read more: CS601 Data Communication - Virtual University of Pakistan


mcqs past pprs myn se 20% the.






guria (bcs) thanks for sharing 

just 20%

today CS601 paper..

mcqs almost from past papers..

4 question 2 marks

1. in which situation, checksum cannot detect error?

2. geosynchronous satellite?

3. name of devices 

for internetworking devices, and networking devices

4 questions for 3 marks

  1. capacity of T1 line for  24 voice chanal at 8000
  2. mr. amir wants to estalish a network, what three types of guided media you suggest him?
  3. steps of uploading, why uploading speed is less then downloading?

4 question of 5 marks

  1. CSMA/CD In this carrier scenc multiple access with colission detectin

what is meant by,  carrier scenc,  multiple access,   collision detection

2.  write the timer and regiester for FDDI and ASCI.?

3.  what is the process of ack and lost of data in GO-N-BACK AND SELECTIVE REJECT ARQ?

mcqs past pprs myn se 20% the.






VU Today's Final Term Paper For Fall 2013
Total Questions = 52 of Total 80 Marks
Total MCQ = 40 Each of 1 marks
Total Short Questions = 4 Each of 2 marks
Total Short Questions = 4 Each of 3 marks
Total Long Questions = 4 Each of 5 marks

Q)Find db?

Q)Find power loss?

Q)Find the type of error in the given data?

Q)Why we need address bit in ATDM?Disadvantage of using address bit ?

Q)What does NAK represent in poll?

Q)Define Carrier sence, Multiple access, Collision detection?

Q)How lost frame and ACK is treated in Go BAck and ARQ?

Q)Types of synchronous protocols?

Q)Advantages of STP over UTP?







Thanks For Sharing

Mcqs koon si file se ae rahe hn please koi btaye 

Bta de koi...... Ma to chat se b suspend hoon bilawaja suspend kr diya.Koi to bta de

anyone share all solve 2014 CS601 paper, anyone solve the subjective and upload, please 


© 2022   Created by + M.Tariq Malik.   Powered by

Promote Us  |  Report an Issue  |  Privacy Policy  |  Terms of Service