We are here with you hands in hands to facilitate your learning & don't appreciate the idea of copying or replicating solutions. Read More>>

Looking For Something at vustudents.ning.com? Click Here to Search

www.bit.ly/vucodes

+ Link For Assignments, GDBs & Online Quizzes Solution

www.bit.ly/papersvu

+ Link For Past Papers, Solved MCQs, Short Notes & More


Dear Students! Share your Assignments / GDBs / Quizzes files as you receive in your LMS, So it can be discussed/solved timely. Add Discussion

How to Add New Discussion in Study Group ? Step By Step Guide Click Here.

Assignment No. 02

Graded
Semester: Spring 2018

CS609: System Programming

Total Marks: 20

 

Due Date:

May 29, 2018

 

Instructions:

 

Please read the following instructions carefully before submitting assignment. It should be clear that your assignment will not get any credit if:

 

§  The assignment is submitted after due date.

§  The submitted assignment does not open or file is corrupt.

§  You have not followed steps described in Detailed Instructions of the problem statement.

§  Assignment is copied(partial or full) from any source (websites, forums, students, etc.) Strict action will be taken in this regard.

 

Note:You have to upload only .doc or .docx file. Assignment in any other format (extension) will not be accepted and will be awarded with zero marks.

 

Objectives:

 

The objective of this assignment is to provide hands-on experience ofSystem Programming concepts including:

 

·         Interval Timer

·         Accessing PC Speaker

·         Loading divisor values in Interval Timer

 

 

   

For any assignment related query, contact at CS609@vu.edu.pk

 

 

Problem Statement:

 

Write a C program that will turn on PC speaker (for variable-pitched sound) by using port 61H of Interval Timer. The divisor value for Interval Timer will be last eight digits of your Student ID.

 

Detailed Instructions:

1)      In this program,you will access internal PC speaker by using port 61H. Least two significant bits of port 61H are used for connecting PC speaker to Interval Timer.

2)      In order to program Interval Timer, you have to first load the Command Byte into the Command Register. Calculate Command Byte according to following criteria:

a.       Channel: 2

b.      Interval Timer Mode: 2

c.       Counter: Binary

d.      Divisor bytes to be loaded: All (For calculating divisor value, read instruction 4)

3)      You will first load last four digits of your Student ID as a divisor value (see the purple color digits in below example ID), and then after a delay of 2 seconds, you will again load new divisor value which will be next four digits of your Student ID (see the orange color digits in below example ID).

BC123456789

4)      For producing delay, use Timer Count, a double word variable in the BIOS data area which is placed at the location 0040:006C

5)      After loading each divisor value, turn on the PC speaker

6)      You can check the output of the program by booting your system in DOS mode and then running the exe file. But does not worry if PC speaker does not produce sound; the host operating system may restrict you to directly access PC speaker. Just focus on the concepts.

7)      Your assignment file should be a single Word file (.doc or .docx) containing complete code.

8)      You can use Consolas font for enhancing readability of the code in Word file.

 

 

Best of Luck!

 

 

+ How to Follow the New Added Discussions at Your Mail Address?

+ How to Join Subject Study Groups & Get Helping Material?

+ How to become Top Reputation, Angels, Intellectual, Featured Members & Moderators?

+ VU Students Reserves The Right to Delete Your Profile, If?


See Your Saved Posts Timeline

Views: 10141

.

+ http://bit.ly/vucodes (Link for Assignments, GDBs & Online Quizzes Solution)

+ http://bit.ly/papersvu (Link for Past Papers, Solved MCQs, Short Notes & More)

+ Click Here to Search (Looking For something at vustudents.ning.com?)

+ Click Here To Join (Our facebook study Group)

Attachments:

Replies to This Discussion

koe tu solution upload kr da,aj last date hy

I think is program se milti julti coding ho gi

#define ON
#define OFF
(1)
(0)
/*------------------------------------------------
ChangeSpeaker - Turn speaker on or off.
*/
void ChangeSpeaker( int status )
{
int portval;
portval = inportb( 0x61 );
if ( status==ON )
portval |= 0x03;

else
portval &=~ 0x03;
outportb( 0x61, portval );
} /*--ChangeSpeaker( )----------*/
void Sound( int hertz )
{
unsigned divisor = 1193180L / hertz;

ChangeSpeaker( ON );
outportb(
outportb(
outportb(
} /*--Sound(
0x43, 0xB6 );
0x42, divisor & 0xFF ) ;
0x42, divisor >> 8 ) ;
)-----*/
void NoSound( void )
{
ChangeSpeaker( OFF );
} /*--NoSound( )------*/

int main( void )
{
Sound( 355 );
delay( 1000 );
Sound( 733 );
delay( 1000 );
NoSound( );
return(0);
} /*--main( )-------*/

Kindly Send the Complete Solution...

its a wrong solution not work completely 

abhee b sub think kar ry..no one has solution

han yar no one has solution   

koe tu solution upload kr da,phle wale b expire ho gaie th.ar kya yh c program main bnane hy?

Solution please...........

solution plz...

lgta hy meri trha kisi ka interest nhi system programming me

hello friends solution of cs609 wanted

plz solution......???????

RSS

Latest Activity

Today Top Members 

© 2019   Created by + M.Tariq Malik.   Powered by

Promote Us  |  Report an Issue  |  Privacy Policy  |  Terms of Service

.